Created on 03/16/2016
c
2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 1 of 6
MODEL
MAT
Ninety degree
CAVITY: T-21A
1 2 3 4
5 6 7 8
9 10 11 12
TECHNICAL DATA
Body Type Line mount
Interface None
Body Features Ninety degree
Mounting Hole Diameter 8.6 mm
Mounting Hole Depth Through
Mounting Hole Quantity 2
PORT DESIGNATORS
Modifiers Ports
MAT All Ports: 1/4" BSPP;
MODIFIER
6061-T651 Aluminum, Buna-N
/S 65-45-12 Ductile Iron, Buna-N, Blackened
snhy.com/MAT
MANIFOLD FACES
FACE GRID
Important: Carefully consider the maximum system pressure. The pressure rating of the manifold is dependent on the manifold material, with the port
type/size a secondary consideration. Manifolds constructed of aluminum are not rated for pressures higher than 3000 psi (210 bar), regardless of the port
type/size specified.
NOTES
Model Code Example: MAT
CONFIGURATION OPTIONS
Created on 03/16/2016
c
2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 2 of 6
Face 2
Face 5
Created on 03/16/2016
c
2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 3 of 6
Face 6
Created on 03/16/2016
c
2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 4 of 6
Face 7
Created on 03/16/2016
c
2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 5 of 6
Face 10
Created on 03/16/2016
c
2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 6 of 6
